Silver being such a standard metallic color can be produced

When we talk of Silver Wedding Bands we are not talking about the metal Silver but the color of silver itself. Traditionally your only other choice for a Wedding Band was Gold, however modern times now allow metals to be coloured to nearly any color imaginable and the real choice would rest with the wearer. However in this article we will be focused on Silver Wedding Bands only.

Silver being such a standard metallic color can be produced by many metals and if you are looking for a Silver Wedding Band your metal choice is a big decision. Top of the price list would be Platinum however if you cannot afford this there are many other options. Other choices include White Gold, Titanium, Tungsten and Palladium.

It should be noted that Sterling Silver is not suitable for use in Wedding Band designs. While still being a precious metal Silver tarnishes too easily and would require too much maintenance to keep it looking its best.

Platinum is said to have a white color and as such looks very nice on ones hand especially when used with diamonds automotive fastener manufacturers in the design. The bright white color of Platinum enhances the sparkle and brilliance of diamonds to make these Silver Wedding Bands simply awesome. Platinum bands are heavily weighted and while being very expensive, often twice as much as gold per ounce, these rings are very durable, strong and long lasting.

White Gold is definitely the Silver Wedding Band metal of choice. Wedding Bands will be found in 18Karot and 14Karot Gold to allow different price options. While both of these variations are quite hard and durable, gold is somewhat soft in its purest form and even these bands can be bent, scratched and dented if not taken care of. However as they are gold rings they look and feel great.

Titanium Wedding Bands are becoming quite popular especially in men’s designs. Being the hardest known element known to man, Titanium rings provide the most durable Silver Wedding Band available. You will find that these bands can cop a lot of abuse and will not bend, scratch or dent. The only limiting factor is that they are quite light and can feel a little cheap. The up side is that they are very cheap in comparison to White Gold and Platinum and they can also be coloured and combined with gold and diamonds to enhance their weight and attractiveness.

Another very hard and durable ring metal is Tungsten. Tungsten Wedding Bands have been demonstrated to be so scratch resistant that even excessive filing with a large metal file to deliberately damage them will not scratch the ring. These bands are also very cheap and can be found for less than $100. Do not think that these are cheap and nasty in any way but more of a practical design that will most likely outlive a gold or platinum band. And of course they are available in many standard and fancy designs to suit every personality.

Finally there is another choice when looking at Silver Wedding Bands. Palladium is a metal that belongs to the same family as Platinum. While not being as expensive as Platinum it looks just as bright as Platinum and feels like White Gold. This is a great alternative if you are looking for a ring similar to White Gold but cannot afford Platinum.

One more attractive feature of the Titanium, Tungsten and Palladium Bands is the fact that they are all hypoallergenic. This means that they will not cause any skin reactions or discolorations on the wearer’s finger. These rings may really be the Silver Wedding Bands of the future.

Gold is still the standard for wedding rings

Wedding rings are more than just a piece of jewelry. They are the ultimate symbol of marriage. Rings are purchased for both the bride and the groom, even if the groom insists he doesn’t need to wear one to show his commitment!

Wedding rings are exchanged as part of the ceremony, normally as vows are said by both parties. They are often matched to the engagement ring, so you might want to choose simply for the engagement ring or choose a complete set. If you want to rehearse for the big day, wedding rings are always placed on the finger first, and the engagement ring is placed on top of it. If you have yet to purchase your ring set, keep the following guidelines in mind:

Going For The Gold

Gold is still the standard for wedding rings, and is instantly recognizable as a wedding band. However, white gold is an excellent alternative. White gold gets its color by blending with another white metal like silver or palladium. This blend is called an alloy. An advantage of white gold is that is typically retains the better qualities of yellow gold, like low risks of skin irritation, and is often mistaken for the more expensive platinum. hi strength bolt co Platinum Pass

Platinum is the metal of choice for rings because it is more rare and durable than gold. Platinum is an elegant metal, which is very popular these days because of its white, shiny look and durability. Platinum is actually more precious than gold and can cost up to twice as much.

If you prefer a white metal and are willing to be non-traditional, there is one more alternative.

What About Titanium?

Titanium wedding bands are an ideal choice for the adventurous, outdoorsy couple because a titanium ring requires very little care and is almost impossible to damage. Titanium wedding bands are unique in that it is one of the strongest metals. Yet, they are very light in weight. Titanium is a non-allergenic material, with none of the skin rashes that can occur with some white metals like nickel or nickel alloys.

And Finally, Diamonds Are Forever

Diamond wedding rings are the most often bought type of wedding rings, and go well with gold, white gold, silver, and platinum bands. Diamond engagement rings can be dressed up with other stones like sapphires, rubies and emeralds, but the diamonds are still the most important. Diamonds were also considered to be gifts of the gods and as such must be cherished. Diamond engagement rings thus symbolize love and eternity, which explains their popularity with men and women alike.

The term hollow metal door is commonly used to refer to a steel commercial

Whether residential, commercial or institutional, all means of egress are made secure by using some sort of door and frame even if only to keep inclement weather or pesky insects outside. Hollow metal doors and frames can be designed to be weather and bug resistant.Today When an opening requires strength,security,durability or maximum fire resistance in any combination, steel doors and frames provide the qualities to meet these needs.

Most of the Manufacturer of Hollow Metal Doors and Hollow Metal Frames follow norms of the Standard Steel Doors and Frames for Modular Masonry Construction set by Steel Door Institute.The door and frame are the platform on which the total opening is built. Although not the most expensive part of the opening,they often cause the most difficult problems.

The term hollow metal door is commonly used to refer to a steel commercial door in order to help distinguish a swinging door from an overhead roll-up steel door.Hollow metal doors and frames are primarily used in commercial construction and are used for interior and exterior use.They are made of thin sheets of steel that range from 1.2mm thick or 14 to 16 gauge on average. Because of the complexity of modern hardware devices, it is important that installers choose the correct sizes of doors and frames when ordering these materials.

Hollow metal doors and frames are typically listed in nominal sizes, where a door measuring 3′ wide and 7′ tall would be listed as 3070. When it comes to actual sizes, however, doors and frames can measure quite differently from their nominal size.

By knowing how to size these materials properly, you’ll greatly improve your chances of achieving a successful installation.

Sizing Hollow Metal Frames or knock down hollow metal frames.

Determine which type of wall the frame will be installed into. In drywall partitions, the frame should measure 1″ smaller than the wall opening in both height and width. In a masonry wall, the frame should be 2″ smaller than the opening.

Examine the building plans to determine how the frames should be installed. Hollow automotive fasteners suppliers metal frames can either wrap around a wall or butt up against it. While this is largely a matter of designer preference, most masonry frames are butted while most drywall frames are wrapped around the wall.

Calculate the jamb depth of the frame. The jamb depth is a measure of how thick the frame should be where it meets the wall. If the frame will be butted, it should have a jamb depth equal to the thickness of the wall. If it will be wrapped, it should measure 1″ wider than the wall. The jamb depth on masonry frames will always be measured in 1/4″ increments, while drywall frames will always be measured in 1/8″ increments. For example, a drywall frame that is intended to wrap around a 4-7/8″ wall will require a jamb depth of 5-7/8″.

Sizing Hollow Metal Doors

Determine the actual width of the door. Hollow metal doors should be 1/8″ smaller than the frame across the width of the door. This allows for 1/16″ clearance on each side so the door can swing in the opening without interference.

Calculate the height of the door. Doors are typically sized 3/4″ to 7/8″ smaller than the frame in terms of height. This allows for 1/8″ clearance at the top of the opening, and 5/8″ to 3/4″ at the bottom. The amount of clearance at the bottom depends on the height of the floor coverings or thresholds. A door with a thick carpet underneath should be undersized a full 7/8″ in total, while one sitting on bare concrete will only need to be undersized 3/4″.

Consider pairs of doors. Doors that will be installed as a pair in a single frame are sized slightly differently. Each door should be undersized 3/4″ to 7/8″ according to the information in step 2. Width-wise, however, each leaf on a pair of doors should only be 3/16″ smaller than the frame. This helps to create a 1/16″ clearance at each hinge jamb as well as a 1/16″ clearance between the two doors. This helps to minimize the risks of large gaps between the doors, which can create problems with keeping the doors closed and locked.

Please note well that size of metal HMPS door may change from manufacturer to manufacturer for Types of Hollow Metal doors.

Author of the article are Manufacturer of Commercial Steel Doors and Frames – The Best Door in the Industry.They are Manufacturer of Hollow Metal Commercial Steel Doors and Frames,windows.Dorplus is a leading Manufacturer of commercial and residential metal and Steel Doors and Frames, windows, standard and custom doors, security doors and security windows and are Architectural Door, Building material metal door and steel doors supplier & exporter worldwide.

Much has been said about metal roofing

Much has been said about metal roofing. But metal has a rather broad meaning. There are a lot of existing metals today and each of them has different compositions and form. Here are the different metals used in a metal roofing system. How each of them is expected to behave, their features, and their benefits to you are also listed for further reference.

1. Steel. Steel is the most commonly used metal for roofing. It automotive fastener manufacturers is a popular choice because it is not only heavy and sturdy, but it also works well with roof coatings for protection against rust and corrosion making it ideal for roofs. It is known that manufacturers choose steel over other metals for roofing.

Roofing must be sturdy for it to withstand the elements. It should withstand water during rains and storms. Steel, with the proper protection, can last long without corrosion. Paint and coatings like zinc, epoxy primer, acrylic, among others can protect steel from rust an make it more appealing.

Because of its durability, steel roofing is not only popular among residential structures but also with commercial establishments. The stainless steel is also a popular choice. Although it is a tad more expensive, people still opt for this type of metal. It is absolutely non-corrosive. Stainless steel roofs are meant to last as long as you want them to last.

2. Aluminum. A popular alternative to steel is aluminum. It can also withstand corrosion but it also needs to be coated and/or painted. Aluminum is fairly affordable making it a well-liked choice for roofing. Because it is extremely lightweight, people tend to think that it is unable to give the protection that their structures need.

Architects find it easier to do even the very complex designs that you want with aluminum because it is also lightweight. Another advantage of using aluminum is that it is corrosion-resistant. One just has to look for the paint color that you want. With the right choice of coating, you not only achieve protection from rust but you also get your desired aesthetic beauty. Roof paint and coating that you normally use for steel are also the same ones that you use with aluminum.

3. Copper. More people are convinced though, that copper is the best choice when it comes to metal roofing. Architects and construction experts favor using copper because of it does not rust nor peel. It does not need any type of coating to protect it from corrosion. It also has that natural red hue that makes it ready for installation even without a paint job. Copper, for a lot of people, is the superior material for any metal roofing requirement.

The only disadvantage of using copper for your roofing requirement is its hefty cost. Although some would justify that this disadvantage will even out over the years if you take into account maintenance, repairs, and repainting. Copper is also soft that it is easy to install. Also because of this, it is able to transform itself into a verdigris patina through time. This makes it even more attractive when its other metal counterparts are already worn out.

4. Alloys. When metals are mixed to come up with a specific raw material, their outstanding features are also combined. This is the advantage of alloys among other metal roofing materials. The alloy has been gaining popularity as the favorite among structure-builders and designers. Alloys are custom built to address the specific requirements of each structure. When it comes to the cost, it can be very expensive considering the manufacturing and customization that has to be done to produce it. However, even with the high cost of this material, establishments with specific requirements still opt to use it.

These metal roofing options are appreciated by people who build their homes, business establishments and other structures. Even with very distinct requirements, they always find an alternative to choose from. Building roofs are not as complex as we’d imagine them to be. There is always a ready metal roofing for every house, or building that we have in mind.

My winter exercise of choice is the rowing machine

I am a warm weather guy. Fortunately I live in a so so climate, so I m able to bike during most of spring and fall, and I m always on my bike in the summer. Once the temperature goes below 40 degrees, however, I spend as little time outside as possible. In other words, I don t ski, I don t snowshoe, I don t ice skate, and I stay inside and stay warm. But after spending around nine months of the year biking, I don t mind taking a break and spending the remaining three months on a rowing machine instead.

My winter exercise of choice is the rowing machine. I m not talking about the rowing machines you find in most gyms and health clubs, the kind where you use both hands to pull on a single handle attached to a cable that goes around a flywheel. Although those are great, if that is all you have access to, than I say go for it. I am talking about a real rowing machine such as a Kettler or Stamina, a rowing machine with dual arms and piston resistance.

With a machine with two independent arms, you really feel like you re actually rowing. Rowing also exercises a great many of your muscles. Depending on how you position your hands on the arms, you are able to work on either your biceps or triceps, and of course your stomach, calves and thighs get quite a workout as well. And depending on the speed with which you row, you can work on your aerobic endurance as well. Watch a video of some seafaring saga (the first Pirates of the Caribbean springs to mind) and that ll get you in the right mood as well.

Types of rowing machines

Piston resistance dual arm

According to third party descriptions of rowing machines,  piston models are the smallest and least expensive options,  and the major drawback is that taller people won t be able to fit on the frame.

Air resistance

These types of rowing machines use a fan to create resistance. Because of this design, they have a long frame, and therefore take up more space. The fan is also rather loud.

Air/magnetic

The Air/Magnetic rowers combine two types of resistance. Fans blow to begin with, but the more your effort to row increases, then the magnetic resistance takes over   which is typically the quietest form of rowing machine resistance. These kinds of machines are also typically the most expensive.

If you are fortunate enough to live near a quiet river, or a reservoir, you can row all year round, in a  shell.  (If you ve ever seen the classic series Banacek, you know what a shell is) There s nothing quite like propelling yourself along on a real river, hearing the blades of the oars dip into the water, seeing real scenery pass by…(if you row on a river you re called a  sculler. )