In the Fruit Juice Production Line, the main machine adopts a fully enclosed window, the filling area is isolated from the rinsing area, and the filling part can be used for local level 100 purification to ensure that the environment of the filling area meets the requirements for medium temperature filling. The bottle is connected by the active clamp, which minimizes the adjustment operation of the equipment when changing the bottle type while ensuring the same bottle mouth. The main engine adopts a SEW reducer and a coupling to transmit power together to ensure stable operation of the main engine. Then, when the operation of the beverage production line is unstable, what should we do?
Let’s analyze the four situations in which the beverage production line is unstable:
1. Can not be detected, the phenomenon is unstable waveform, or there is no small valley, or a straight line. Detecting the hanging ink or connecting with the charging ink, clean the nozzle.
2. The breakpoint is not good, the phenomenon is unstable waveform, or there is no small valley, the nozzle is slightly blocked, the nozzle is cleaned or the pressure point frequency is adjusted.
3. The high voltage is too large, the phase is disturbed, and the phase does not open. The high voltage waveform is normal. After the high voltage is turned on, the waveform is disordered, and the small set pressure is adjusted to ensure positive and negative high pressure drying.
4. The phase detection board burns out. The phenomenon is that the spray information is good or bad, the phase parameter changes greatly, and there is no waveform or the previous full screen waveform. The phase plate can be replaced.
Welcome to contact and contact Shanghai Jimei Food Machinery Co., Ltd., we will provide you with more information about the production and equipment of Milk Processing Plant!