You will need a Wireless Router to connect each PC

Phoneline Network adapters are installed in each PC.

Basic kits will have instructions and software for the network as seen as two NICs.A Bridge will be needed for access to the internet.The wired network will also need a Hub or a Switch to direct traffic from each system.Let’s take a look at each network and the components needed to get it up and running.Remember to enjoy learning about your computer by performing as many tasks as you can without causing damage Directional Couplers to your system.Each network will need a hub, switch,or router to transfer data.

This network has a drawback in back it will have lots of electrical noise which will cause the network to lose speed.These Bridges can be used with your Router.

You will need a Wireless Router to connect each PC to the network.But most wireless networks now use the Radio Transceiver technology with computers being located just about anywhere.The purpose for this is to make it easy to return the component if needed.

You first should decide which network is best your you.

In a nutshell,all networks will need some type of adapter inserted in the computer.Then we’re going to see how to move data from one machine to the other and share the internet using broadband with a DSL or a Cable modem.The wired by cable network should work just fine.


The powerline network uses the electrical wiring in your home to transfer data to and from each computer.Take note of the difference between the wired nic and the wireless nic cards.In most cases,the 10mbps speed network is fast enough for home users. You want to be armed to the teach with knowledge of just what it takes to connect your computers to one another.Wireless network equipment will offer you the choice of both wired and wireless connections.

Computer that may be close to each other but cannot be seen may and have phone jacks close by can easily be networked with the HomePNA Network.Wireless NIC Cards must be installed in each computer in the network. If your computers are in the same room,the Wireless network should not be considered.While PCs that are far from each other can be connected with the powerline network,assuming wall outlets are nearby.If you want fast traffic,and who don’t,you will want to connect a Switch instead of a Hub.more dependable and faster when compared with the Powerline network.

We have taken a brief look at the hardware needed to network SC Optical Fiber Adapter two or more computers.Better known as Network Interface Cards,these NICs are installed in empty slots in the system unit.To reduce line noise,a Phone Filter may be needed.Present powerline networks run between 50kbps or Kilobits Per Second and 350kbps.And other PC users can snoop in your computer if they know how.This network is considered the easiest to setup.


If your computers are in the same room,the basic network kit can wire your systems together.Connecting the hardware was rather simple when we networked our computers using the wireless technology.After you decide on the type of network that is best for you,knowing what components you’ll need to purchase will be a great help.Be sure to carefully open any kit or component you purchase and do not damage the box it came in.If you plan to connect a phone and line in one phone jack.

As you can see when looking at the wireless Router,you have the option to wire your computers together should something go wrong with any wireless component.Be sure each computer in the network are close to a phone jack.The network will need cabling to connect the computers and the CAT 5 or Category 5 cable is the one to look for.


The components you will need in the Home Network are close to that of the Wireless network.If you want all PCs to connect to the Internet,most kits come with Special Bridging Software which links the systems together.

And when there are computers in different rooms and you want the convenience of moving the systems from room to room,the more expensive Wireless Network is the way to go.

Since we have seen basic network components,its time to see how each component is installed and connected.If you have not decided already,you will soon want to network your two or more computers in your will have to invest in a Line Splitter.


Wireless networks rely on radio frequency to transmit and receive data.The PCI slot is where the card is installed and there are the USB adapters as well.Learn all you can about PC networking and you will be grateful in having this knowledge should you experience computer problems.

The computers are connected with a Switch,a gateway,or Router to share Internet access and to send data to each computer through the phone line network.

The Phoneline Network is thought to be less expensive .

This network will need a Router for data transfer and nic cards for each system.Adapters and and other hardware will come with device driver software which enables the hardware to talk to the computer.Windows 98,Me,and XP will have the needed software to make everything work together. The USB or Universal Seriel Bus port connection is the most commonly used adapter for Phoneline networks.When you purchase your wireless kit,take note of the indoor range.

If your computers are in direct line of each other,the IR or Infrared frequency can be used.

Ethernet networks come in two speeds,which are 10 and 100mbps or megabits per second.

Leave a Reply

Your email address will not be published. Required fields are marked *


You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>